Label Dispenser Manual Sticker Semi-Automatic Stripping Machine Tools X-130

Description

Label Dispenser Manual Sticker Semi-Automatic Stripping Machine Tools X-130
Description
Automatic Label Dispenser
Label Dispenser
automatic label count
Item No.:X-130
Dimensions:166(W)*174(H)*280(L)mm
Speed:130mm/sec
Label width:5-130mm
Max.Dia.:250mm
Voltage:110V/60HZ;220V/50HZ
G.W:4.2KGS
Use Instruction:
Wrapped the Lable on the hanging board as the picture shows and fix with positioning plate.
Insert the guide plate,then insert the label into between the label delivery board and the middle stick,shows U shape shape,then adjust the guide board according to the label width.
Please hange the label into the roll paper device,open the upper device and put the label into the 3 sticks of roll paper device.
Close the Interlock lever,press the paper press plate button till hear the clocked alarming.
Open the power switch which behind right direction.
When the machine in stripping labels,please get the labels from the buttom up.
Automatic label stripping machine usage:
1. Hang the label paper roll. As shown in the figure, the label reel is hung on the label hanging plate and fixed by the positioning plate.
2. Clamp the guide. Clamp the label paper between the middle rods of the paper guide. As shown in the figure, adjust the guide according to the width of the label.
3. Hang the label paper on the reel. Open the upper unit and hang the label as shown in the three struts of the reel.
4. Cover the interlocking lever. Press the interlock lever until the sound of the lock is released.
5, the power switch. Turn on the power switch on the right rear of the automatic label peeler.
6, use the map. When peeling off the label, peel it off from the bottom up.
Remarks: If you pull the label, the label bottom paper will block the sensor, please pay more attention.
Package Includes:
Selected variation