-40%

NAD 304 Vintage Stereo Integrated Amplifier (Copy of the Owners Manual Included)

$ 137.27

Availability: 52 in stock
  • Condition: This is fully tested and all controls, functions, and lights work as they should. This is in excellent lightly used condition. A copy of the original owners manual is included. Please look carefully at all the pictures for it's exact condition.
  • Refund will be given as: Money Back
  • Return shipping will be paid by: Seller
  • Restocking Fee: No
  • Country/Region of Manufacture: China
  • This sold new in 1992 for 0.00: That's 9.42 in today's dollars!
  • Item must be returned within: 30 Days
  • All returns accepted: Returns Accepted
  • Model: 304

    Description

    This is fully tested and all controls, functions, and lights work as they should. This is in excellent lightly used condition. A copy of the original owners manual is included. Please look carefully at all the pictures for it's exact condition.
    NAD 304 Stereo Integrated Amplifier (1992-96)
    In its appearance the amplifier resembles the modest and unpretentious design that is hard to compete with the luxury models of the large brands, but the surface impressions are often deceptive and this fact takes place in this case. When you have connected the amplifier to a network and carried out the necessary connections, you realize that the "ugly duckling" is actually a very serious product. The faceplate of the NAD 304 is made of iron-grey plastic and features the main controls: the volume control, the balance control, the tone control and a number of buttons which provide the selection of the program and the switching of the modes such as: the equalizer cutoff, the startup of the "Tape monitor" mode. The input and output RCA connectors are placed side-by-side on the backboard. These RCA connectors have the nickel coating and the binding posts for two pairs of the loudspeakers. The NAD 304 amplifier will allow you to extend the capabilities of the signal processing at the input, if necessary, - for this purpose it is enough to dismantle the factory jumpers which connect the output of the preamplifier with the final amplifier. Thus there is the open of the signal circuit and you can install the following devices there: the equalizer, the reverberator, the crossover and so on. The nominal rating power of the amplifier is 2 x 35 W. The signal limiting occurs when the prolonged power output is equal to 42 W, in this case the overload indicator lights up. The short-term dynamic power can reach 120 watts. The external evidence shows a fairly high level of technical performance of the NAD 304.
    It should be said that its sound have made the most favorable impression on us. The amplifier can adequately catch the spirit of the music pieces and inspire the listeners for the empathy in accordance with the genre of the pieces. As it has been noted, the sound is thorough, neutral and lush and it is easy to distinguish the subtle shades of tonalities. According to the highest criteria, the amplifier is a bit lack of intensity at low frequencies, but it has rather live acoustic sound transmission. The sound of chamber orchestras and soloists is brilliantly transmitted.
    Type
    Integrated Stereo Amplifier
    Number of channels
    2
    Output Power (8 Ohm)
    37 W
    Frequency Response
    20 - 20000 Hz
    Signal/noise ration
    117 dB
    Total harmonic distortion
    0,03 %
    Input Sensitivity (line)
    165 mV
    Input Impedance (line)
    20 kOhm
    Input Sensitivity (MM)
    2,5 mV
    Input Impedance (MM)
    47 kOhm
    Treble control
    ±5dB at 10kHz
    Bass control
    ±7dB at 50Hz
    Dimensions (WxHxD mm)
    420 x 108 x 320mm / 16.5" x 4.2" x 12.6"
    Weight (kg)
    6.4 kg / 14 lbs
    hasrock Services is proud to be:
    ( ISTA 6-FEDEX_A Protocol Certified )
    This is a registered certification in electronic packaging.
    We are approved to safely ship any electronics up to and including 150 lb. packages.
    The ISTA 6-FEDEX A Protocol is an
    earned certification
    .
    This is achieved by packaging and shipping electronics to the FedEx packaging laboratory, in Collierville, Tennessee
    They put that package through rigorous testing including the following:
    Shock Test: (10 random drops from 30 Inches)
    Compression Test: The package is then tested in a press at 976.94 lbs. of pressure.
    Vibration Test: The package is then put on a vibration table and violently shaken for 45 minutes.
    You must pass all three tests without any damage, cosmetically or functionality.
    This will be double boxed, surrounded in foam to insure safe undamaged delivery to your home or business. Yes, the shipping cost is a little high, but electronics are fragile and do require a lot of packaging and time to get them done right. I think it's worth a few extra bucks, because they can't be replaced. A
    note for you eBay global customers: (
    I will get it to your door safely and insured.)
    P.S. My posted shipping price is always the total!
    I
    pride myself on extreme over protective packaging.
    (Please see my feedback!)
    I will only ship to the 48 contiguous states and I encourage eBay global shipping. Payment is expected in 48 hours of purchase and on the same token they will ship on the next business day. If you need more time, just send a message and we will work something out.