REBUILD SERVICE for Marantz 1060 Amplifier - Full Recap Capacitors & Transistors

Description

This listing is for a complete rebuild service for a Marantz 1060.
You are not buying an actual amplifier
, you are buying the rebuild service.  You send me your 1060 and I will rebuild it for you.  I have rebuilt a lot of 1060s in the last year, as well as lots of other Marantz and similar gear.  I work on a lot of vintage gear, but I especially enjoy rebuilding the 1060.  It's just so fun to go through these!
The service includes:
New power switch/snubber capacitor/pushbutton
Power light replaced with correct incandescent bulb
P800 power supply board rebuild (4 capacitors, 1 transistor, 2 diodes)
P400 preamp board rebuild (13 capacitors, 8 transistors)
P900 phono EQ board rebuild (7 capacitors, 6 transistors)
P700 amplifier board rebuild (12 capacitors, 6 transistors, 4 trimmers)
3 new main capacitors, plus a new smaller clamp for one
New bridge rectifier & 2 attached .022 uf capacitors
Clean/lube controls with Deoxit
Set amplifier board bias & DC balance
General cleaning
Generally I do not replace the power cord, output transistors, any resistors, or the 6 2SC959/2SA606 transistors on the amplifier board.  If any of these need to be replaced there will be a small additional charge:
power cord
Onsemi MJ21194G output transistors each
2N3416/2N3440 transistors (replacements for
2SA606/
2SC959) each
no charge for resistors
I use top-quality genuine parts.  Capacitors are Panasonic FC, Nichicon PW, Nichicon KL, Wima film, and Cornell-Dubilier (for the 3 main caps).  The extra-large main capacitor is replaced with a new smaller capacitor and a new clamp is installed as well.  Transistors are Fairchild/Onsemi KSC1845, KSA992, KSC2383, KSC945, and KSA1013, and diodes are 1N4004.  These are the exact same parts I use when I rebuild Marantz 1060s, and they are the same parts in the kits that I sell on eBay.  Please note that this rebuild service is for the Marantz 1060, not the 1060B or anything else.
The standard rebuild service is intended to rebuild a working or mostly working Marantz 1060 amplifier, and it will fix almost any issues with the 1060 except for blown outputs and related damage, which will cost a bit more.  If your 1060 has been worked on in the past, or has been through a failed recap/rebuild, it may cost extra, or I may not be able to work on it.  Pictures are always helpful.  You are responsible for shipping your amplifier to me, and the shipping cost in this listing will cover return shipping, generally via Fedex.  Local dropoff/pickup is available--I'm in Milwaukee, WI, right off the highway.  Turnaround time is usually 2-8 weeks.
Please see my pictures for details as to what your amplifier will look like when it's finished.  The last picture shows all the parts that will be replaced.
US shipping and handling is .  If you have any questions, please ask.  I have lots of vintage stereo gear and other vintage electronics listed--feel free to take a look!
Ebay Feedback I have received on rebuilt 1060s that I have sold:
"
incredible amplifier, beautifully restored, great seller thank you!"
"
Asset to eBay. Great communication. Fast shipper"
"
Fast shipping and exactly as described! Sounds great and a beautiful little amp!"
"
Incredible! Lovely item, shipped safely & promptly from a super-cool seller. A+"
"Fantastic piece of equipment. flawless and refurbished as sold. Couldn't be happ"
Feedback I have received on this rebuild service:
"Great service, much appreciated."